Connecting and adjusting angles on Provision cameras

This guide shows how to connect to a Provision camera and adjust its angle to match the 3D drawing.

🚨 Missing login credentials? Contact onboarding@indivd.com or call/SMS +46 73 840 65 27 before starting.

Before you start

⛔ You must activate the camera on a Windows PC before using the mobile app. The mobile app cannot activate cameras. If you skip this step, Option 3 will not work.

Option 1: PC via WiFi (IP Tool Manager)

1. Connect to WiFi
   Connect your Windows laptop to the RUT241 router via WiFi.
   Login credentials are on the underside of the router.
2. Download IP Tool Manager
   Download and install IP Manager Tool_1.0.7.16.exe
3. Scan the network
   Open the program and click Scan.
4. Activate the camera
   When the camera appears, enter the username, password, and answer to the security question.
   
   
5. Open live view
   Double-click the camera. Enter login credentials again if prompted.
6. Adjust the angle
   Adjust until the field of view matches the 3D drawing.

Option 2: PC via network cable (IP Tool Manager)

1. Connect with cable
   Connect your Windows laptop to the PoE switch with a network cable.
2. Follow steps 2–6 from Option 1
   Download IP Tool Manager and continue from step 2 above.

Option 3: Mobile app (Provision Cam 2)

⛔ Only use this option after completing Option 1 or 2. The camera must be activated on a PC first.

1. Connect to WiFi
   Connect your phone to the RUT241 router via WiFi.
   Login credentials are on the underside of the router.
2. Download Provision Cam 2
   App Store or Google Play
3. Make sure you are not logged in to the app
   
   
4. Add the camera
   1. Go to Server List
      
      
   2. Tap Add Device
      
      
   3. Select Local Area Network Search to scan for cameras
      
      
   4. When the camera appears, enter the username and password
   5. Tap Save
      
      
5. Adjust the angle
   Open the camera's live view. Adjust until the field of view matches the 3D drawing.